Note: bilevel and ASV devices may only be used on prescription and after instruction. This page describes the devices technically and does not replace medical advice.
All AirCurve 10 in the shop → Ask via WhatsApp
Current offers
All available AirCurve 10 devices with price, operating hours and contents are in the shop category ResMed AirCurve 10 used.
The models at a glance
| Model | How it works (technically) |
|---|---|
| AirCurve 10 S | Bilevel: switches between IPAP and EPAP as soon as it detects your own inhalation or exhalation |
| AirCurve 10 ST | Like S, plus a set backup rate |
| AirCurve 10 VAuto | Adjusts pressure values automatically within set limits |
| AirCurve 10 CS PaceWave | Adaptive servo-ventilation (ASV), support breath by breath; specific contraindications, only after medical assessment |
Which model and settings are suitable is decided solely by your doctor or sleep lab. More about the differences: CPAP or BiPAP?
How we test every AirCurve 10
- Device record with serial number, firmware and operating hours
- Function test, pressure and flow measurement with manometer and flow meter
- Check of running noise and vibration, test of the humidifier heater plate
- Component-by-component reprocessing (air path with alcohol and UV light, hard-to-reach air channels with steam pressure, blower motor dust-free and without cigarette odour using our own process, housing painted and polished), then guarantee seal
In detail: how we test used devices.
Accessories and spare parts
The AirCurve 10 uses many accessories of the 10 series, e.g. the SlimLine tubing 15 mm and the 24 V / 90 W power supply. More parts: spare parts.
Purchase, invoice, guarantee
Invoice with VAT shown; the statutory warranty applies. Details of any voluntary guarantee are on each product page. More bilevel and ventilation devices: Ventilators, BiPAP and ASV.
Frequently asked questions
What is the difference between AirCurve 10 S, ST and VAuto?
S switches between two pressure levels with your breathing, ST adds a backup rate, VAuto adjusts the pressures automatically within set limits.
Can I use an AirCurve 10 without a prescription?
No. Bilevel devices must only be used on prescription and with settings made by your doctor or sleep lab.
Do AirSense 10 accessories fit?
Many do, e.g. SlimLine tubing and the 90 W power supply of the 10 series.
Are the devices tested?
Yes, every device is technically tested and reprocessed before shipping.
We do not replace medical advice. Only change therapy pressure and settings as prescribed by your doctor.
Desstronic UG
Zum Gänsewall 2, 06844 Dessau-Roßlau, Germany
info@desstronic.de · Dessvent@gmail.com
Mon – Fri 9:00 – 17:00
